John's Waterproofing Before & After Photos

This crawlspace had a sump pump that was not working and had standingwater and debris. Our crew came out and removed the old pump and all of the debris. Installed a SaniDry Sedona Dehumidifier which can remove up to 95 pints of water per day and installed a SuperSump Plus and an Ultra Sump sump pump. This customer no longer hs to worry about moisture or mold.

This homes daylight basement had water entering through the flooring. The finished space had wood floors that were warping and buckling. To absolve this issue we removed the floor and damaged sections of the basement. We then installed a full parameter WaterGaurd system, with a TripleSafe Sump pump. Our finishing crew then came in and installed our ThermalDry Elite floor paneling. This finished flooring is non-organic and will not mold. The space was fully refinished and the homeowners will now be able to safely use this space. 

This home was built on a hillside and the slope carried water where it would puddle in the low spot. To address the issues properly, the homeowner wanted to have a full encapsulation. 

This homeowner was experiencing leaking water in their basement. This can happen if there's cracks in the foundation walls or improper drainage was installed. It is usually the cause of too much water pressure puddling up and seeping into the basement. Once this homeowner noticed that their was a water problem, they called John's Waterproofing to get the issue solved and stop the water from flooding in. After discussing their options, they agreed to doing a basement waterproofing so they wouldn't have to worry about it happening again. Our crew first installed a drainage system, WaterGuard, along the interior perimeter of the basement. This is super important in order to control the flow of water and be able to direct it to the sump pump. Our SuperSump Plus sump pump is able to collect the water from the WaterGuard and send it safely away from the homes foundation. Because the homeowner wanted this to be a finished space, we then installed ThermalDry along the foundation walls. ThermalDry is a vapor barrier, made of waterproof material to prevent mold growth, that helps guide moisture from the walls down to the drainage system. It is shingled to the WaterGuard to ensure secure waterflow. Additionally, a SaniDry dehumidifier was installed that works to pull moisture out of the air and control the basement's environment. After the basement waterproofing process is completed, the homeowner gets to enjoy their healthy and dry basement again. 

Customer called to have crawl space cleaned out and encapsulated